Thank you for contacting us!
A representative will be in touch with you soon!

Close this window!

HOGUE 15014 Overmolded Free Float Hand Guard for the AR15/M16 Platform


Plus $15.00 Shipping

Out of stock

HOGUE 15014 Overmolded Free Float Hand Guard for the AR15/M16 Platform
 Determining the length of your gas system: measure the distance from the rear of the gas block to the front of the receiver. If it is approximately 12 ½” it is a rifle length system, if it is approximately 9” it is a Mid length and 7” for a Carbine length.
– The gas tube must be re-bent if you have an OverMolded carbine, mid-length or extended length forend or part #15065. We offer a pre-bent carbine length gas tube (Part #00014).
– 308 Rifles: There are two basic types of 308 “size” AR rifles, often referred to as DPMS or Armalite “compatible” rifles. The parts, magazines etc do not interchange. For an easy way to differentiate between the two styles of rifles, look at the rear bottom of the upper receiver. A DPMS compatible rifle has a rounded edge while an Armalite has an angled edge. We offer a coupler nut for both types. DPMS #15060 with a 1 7/16″-16 TPI and Armalite #15061 with a 1 7/16″-18 TPI.
– Forends work with all barrel types that will work with a standard Delta ring.
– Will not fit rifles with Piston Gas Systems.
– Will fit older model ARs and M-16s with triangular shaped hand guard.
– Coupler Nut Torque specs: 30-80 ft/lbs
– Made of 6061 aircraft aluminum with a molded non-slip elastomer layer on the outside.
Weight: 8.3oz
Internal Diameter: 1.625”
External Diameter: 2”
Length: 7”
Mfg. Part #15014
MSRP. $89.95
Need more info? Complete our quick form and someone will contact you shortly.


    Copyright © 2022 - Side Arm Sams